Model: Entropic Railgun
Model: Entropic Railgun is a Printing Model in Hellpoint. Model: Entropic Railgun is used for crafting Entropic Railgun. Printing Models are used in the Universal Printer to make Weapons, Armors, Shields and Upgrade Chips.
Model: Entropic Railgun Usage:
- Is used for crafting Entropic Railgun
- Required Materials:
Where to find Model: Entropic Railgun:
- Can be found at Alma Mater Atrium near to the breach to Otsego Mansion
- 1x can be found at Arcology Underside. From the lower level. This will pressurize the room and you will be able to head outside. Go left and jump through the platforms. Jump to reach the magnetic lift and walk through the edge. You will find a small room that can be pressurized (you can use it if you don’t have the EVA Suit). Jump over and you will find a room with 2x EVA Victims. Defeat them and keep going. Jump to the next building (the inside is pressurized) and you will have to defeat 1x Siege Victim. Then go outside and you will find it.
Model: Entropic Railgun Notes and Tips:
- Notes and tips goes here...